LCD Controller Case by Walter Hsiao

LCD Controller Case by Walter Hsiao

Бесплатно STL Органайзеры и хранение
  • 13 просмотров

Эта модель размещена на MyMiniFactory. Файлы, изображения и лицензия принадлежат автору.

Открыть на MyMiniFactory ↗

Описание

Case for the RigidBot Community LCD. Optional back clips to the RigidBot bars if used with the adapter cylinder (make sure the LCD doesn't interfere with moving parts). The small cable box can be used to hold the adapter PCB. I used 16mm M3 socket cap screws. The knob is designed for a 6mm shaft. If the knob doesn't fit, try adjusting the scale and printing it again. The switch can break if pressed down too hard. | Download free and paid 3D printable STL files

About this model

LCD Controller Case by Walter Hsiao is a бесплатно 3D model in the Органайзеры и хранение category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.

Похожие модели