cat vase planter - Dannynl81

cat vase planter - Dannynl81

Бесплатно STL Искусство и скульптура
  • 15 просмотров

Эта модель размещена на Creality Cloud. Файлы, изображения и лицензия принадлежат автору.

Открыть на Creality Cloud ↗

Описание

3D MODEL DESCRIPTIONYou can use this adorable cat to plant your plants, or your cats' plants! What a planty subject.This STL file is recommended for FDM Printers! 3D Printing Time Based on Ender 3: 10 Hours 13 Minutes (will vary accord to you printer model) Approximately Lenght: 10 cm3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)Line Width/ Nozzle:0.4 mm First Layer Line Width: 0.48 mm/ 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.16 mm Recommended Layer Height: 0.16 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 10% (Gyroid) Needs Support: No Build Plate Adhesion: Skirt.

About this model

cat vase planter - Dannynl81 is a бесплатно 3D model in the Искусство и скульптура category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

Похожие модели