Nipogi AM02Pro Minipc Sata SSD + E-GPU Lid

Nipogi AM02Pro Minipc Sata SSD + E-GPU Lid

Бесплатно STL Миниатюры
  • 17 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

Made a higher Lid for the Nipogi AM02Pro Mini Pc to use the hidden SATA ssd port underneath it wich u need if u want to use a Egpu on it or if u just want to add a sata ssd! You need: 15 mm M2 standoffs https://www.amazon.de/dp/B07CJGT93C?ref=ppxhzsearchconndtbfedasintitle_7 SATA Power/Data Cable https://de.aliexpress.com/item/1005007868788216.html?spm=a2g0o.orderlist.orderlist_main.5.32295c5fZ2yTNI&gatewayAdapt=glo2deu to use the on board connector u have to cut away a small pice of the plastic cover! Its very esay, it only take a few seconds! The original Bolts will fitt! The SSD just clips in , no hardware necessary!

About this model

Nipogi AM02Pro Minipc Sata SSD + E-GPU Lid is a бесплатно 3D model in the Миниатюры category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели