Rak 1 Watt Solar Node

Описание

Designed to run a Rak 1 Watt Kit, there are two pole mounting type cases here: one with a built in zip tie mount and one that utilizes an antenna attached mount. Both utilize an N type connector for the antenna. Here are some other parts I utilize in my builds:Buck Coverter: Step DOWN: https://a.co/d/01fv2OvK (I run my panels straight into this to regulate to a max of 5v. This converter mounts to the print called "Power Regulator Mount". You just screw it down to that and it clips into the side of the case. What you do from there is up to you, you can run straight to the 1 watt board with the supplied wiring or you can add a USB connection to the out on the board and then USB C to USB C to power the main Rak board (I'm running both configs. This part is only necessary if you're getting some cheapy solar panels that have no solar controller on them. If you're running a panel with straight USB C already on it, you can likely skip this. Always double check with a voltmeter though.The screw down cover is designed to use heat inserts and machine screws. I also added a grove to run a bead of silicone to keep it water tight. I run my solar panels to a disconnect: https://a.co/d/06akD68m and splice everything together. I also included a standoff if you're mounting via the antenna directly: https://a.co/d/0f1McbwH and I like these mounts for the "Hyper Tough" case. I buy these cheap solar lights from walmart and use add them like little wings to that case…