FLEXI GERMANY

Описание

The country of Germany in its national colours. X 174 mm Y 118 13 mm .At the original size the weight of the print is 120 grams but if you reduce the object by 10% and enter only 1 surrounding wall as I did you will reach 78 grams . Suitable for faster more accurate printers like bambulab (5,hours of print , 90% size , 1 wall) , creality K1 ...... Your nozzle must not be overextruded .If it is not accurate enough you have to print the model full size or even larger .You must also have excellent adhesion to the substrate. If you are using a double sided PEI sheet and on one side you are printing exclusively PLA and on the other side PETG I recommend to apply gluestick on the side where you are printing PLA which is evenly spread with a damp foam.Just a fine layer and you have solved the adhesion of PLA to the PEI substrate which is much better than cleaning with isopropyl alcohol.At the same time when the substrate cools down the print will bounce off without any problem.