6.8" DDU for sim racing

6.8" DDU for sim racing

Бесплатно STL Прочее
  • 12 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

Build your own DDU Since buying a DDU is quite expensive I designed and printed my own using a 6.8" VoCore screen and a Pro Micro board. Parts: 1x Vocore 6.8 (old version with micro USB): https://vocore.io/#store 1x Arduino Pro Micro: https://www.aliexpress.com/item/1005005921690245.html 8x WS2812b 8-bit: https://www.aliexpress.com/item/1005006402666492.html 1x USB 2.0 Hub: https://www.aliexpress.com/item/1005001406521390.html 3x USB cable (two male, one female): https://www.aliexpress.com/item/1005001603191836.html 26 AWG cable: https://www.aliexpress.com/item/1005006249194665.html Brass inserts M3 (5 mm x 5 mm): https://www.aliexpress.com/item/1005003582355741.html M3 6 mm screw: https://www.aliexpress.com/item/1005005483315023.html 10x Neodymium magnets: https://www.aliexpress.com/item/1005006328970925.html

About this model

6.8" DDU for sim racing is a бесплатно 3D model in the Прочее category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели