RECTANGLE WALL CLOCK -TRIANGLE PATTERN- - THEBAKERSCOMPANY

Описание

Be different.Print your own wall clock.Size:278x231x23 mmWe printed it crosswise with the CR6-SE (you can see among the pictures)We optimized the clock size for CR6-SE (print size 235 x 235 x 250) . But you can also scale all part to be printable for your printer.Changing color at some layer will give a good appearance.You can glue numbers to fix.You need a clock mechanism like in the link:https://www.amazon.com/clock-mechanism/s?k=clock+mechanismMechanism thread lenght should be more than 16-17 mm, 15mm is very limit. We used a 22mm thread lenght mechanism.3D PRINTING SETTINGSNo support neededThis settings are for a quick and quality print (10-11 hours/220gr).Temp depends to your filament.0,6 mm nozzle0,32mm heigh for a quick print.No infill (if you add infill, the print time and filament cost will increase, as a matter of fact this is a wall clock, it will hang on the wall, it better be light.)Add infill for numberWall speed 30-35mm/sBrim needed: 15 brim line count does the jobZ seam: Position in at the back of the clock (better appearence)Top/bottom pattern: zig zagTop/bottom layer: Min 4-5 for 0 infill, if you will add infill 3 layer will sufficient.Contact us if you have question.