BOX / CASE - Dynatech 3D

Описание

3D MODEL DESCRIPTIONA small case to store your pencils!Body included:--> main part of the case (dimensions: 165 mm x 80 mm x 80 mm)-->kit closure (dimensions: 11.5 mm x 80 mm x 80 mm)-->valve (dimensions: 160 mm x 72 mm)Instructions:-> Print both sides of the kit-> Print the flap of the kit-> Insert the flap into the groove on one side. Do not be afraid.(Don't be afraid, the hinge is solid!)-> Put glue in the holes provided for the flap to fit together.-> Close the kit with the other side-> Wait for the glue to dry-> Enjoy the kit!Don't forget to post your creations!3D PRINTING SETTINGSMinimum bed size required: 170 mm x 80 mmAmount of material required: approx. 180 gMaterial: PLASupport: only for the parts of the kit ( no support for the flap)Nozzle size: 0.4 mmLine width: 0.4 mmLayer height: 0.2 mmOuter walls: 2Filling: 15% of the totalSlow speed for flap: first layer: about 20 mm/s then about 150 mm/s max, with good bed adjustment.If you encounter any problems, feel free to contact me on cults or via Instagram.