Gate USB Link Protective Case

Gate USB Link Protective Case

Бесплатно STL Органайзеры и хранение
  • 25 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

Case for Gate Titan/Aster USB Link. Because the USB Links are wrapped in heat shrink tubing the dimensions of your USB Link may differ slightly from mine. It should be a very tight fit when the case is closed in order to keep the USB Link and cable in place. If you can't fully close the case a solution would be to remove some of the heat shrink tubing. The case is held together by a pin in each corner and tolerances are tight enough to keep it together without glue, but I glued mine since I see no point in not doing so.

About this model

Gate USB Link Protective Case is a бесплатно 3D model in the Органайзеры и хранение category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели