Trijicon MRO Mount (Basic 25mm High)

Trijicon MRO Mount (Basic 25mm High)

Бесплатно STL Гаджеты
  • 15 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

3D Print Spare Trijicon MRO Mount for Rifle Configurations. About Model: Basic box type MIL-STD 1913 Mount for a Trijicon MRO Red Dot with a cowitness height of 25 milimeters from rail to base height of the mount Fastener(s): 2 pc(s) Socket Screws (M4x0.5 RH) in 30mm length 2 pc(s) M4x0.5 RH Bolts for the thread inserts on the body Made in Autodesk FUSION 360 and a Mitutoyo 530-105 Vernier Caliper 6 inches

About this model

Trijicon MRO Mount (Basic 25mm High) is a бесплатно 3D model in the Гаджеты category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели