Lighting Controller Enclosure Box

Описание

Designed around the KulpLights controller brand, this enclosure is an outdoor, weatherproof enclosure that allows for the use of various KulpLights controllers and Meanwell LRS power supplies. The setup involves 3 necessary parts - Controller Enclosure, LRS Mounting Plate and a Base Panel. Additionally, there is a controller mounting plate that mounts directly to the LRS-350 (5 or 12 volt) to mount a variety of KulpLights Controllers and the Light-o-Rama CMB-24D RGB Controller. There are also 3 mounting options including a hanging bracket, in the ground bracket and feet with end caps that utilizes 1/2" PVC for customized heights on your install. 5/2/26 Update: Added two additional files for the LRS mounting plate and the the actual case. This reduces the size to below 250mm so that additional printers can be utilized. The LRS Mounting Plate accepts the following power supplies in both 5 and 12 volt: LRS-75 LRS-150 LRS-350 It will also hold an SRx1 Smart and Dumb Receiver (KulpLights or Falcon Controller) as well as the KulpLights K4-PB. The Controller Mounting Plate will hold: Light-O-Rama: CMB-24D KulpLights: K4-PB K8-Pro K8-Max K8-PB K8-Pi K8-B (1) SRx1 Long Range Receiver (KulpLights or Falcon) (2)SRx1 Long Range Receivers (KulpLights or Falcon) SRx2 Long Range Receiver (KulpLights or Falcon) SRx4Long Range Receiver (KulpLights or Falcon) Recommended that these are printed in PETG or ASA for outdoor use. You will also need M4 Threaded Inserts (short)…