40mm Scope Hex Sunshade

40mm Scope Hex Sunshade

Бесплатно STL Прочее
  • 13 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

Minor ID = 43.65mm Major ID = 49.8mm Length = 65mm Threaded but the threads work more like the teeth on a zip-tie - you threaded in a bit then push to fully seat the sunshade Print Settings (PETG-CF) Layer Height: 0.14mm First Layer Height: 0.2mm Seam Gap: 10% Scarf Joint Seam: Contour Ironing: All Top Surfaces Walls Printing Order: Outer/Inner Walls: 3 Top Shell: 3 Bottom Shell: 3 Infill: There is not infill, so anything goes First Layer Speed: 35 Outer Wall Speed: 45 Inner Wall Speed: 60 Acceleration (all): 1000 Brim: None

About this model

40mm Scope Hex Sunshade is a бесплатно 3D model in the Прочее category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели