Ersatz Action figure kit

Описание

This is a 1/24th scale action figure i had started to work on back in 2009, that i revised because most home resin 3d printers can now print it. This model can be downloaded for free,if you'd like to buy it instead (which would be very kind as this support helps a lot), maybe you should consider printing the model first, then buying it. This way, you know what it is worth :). I added as a bonus an experimental 5 links trunk, which wasn't possible before, because of the tolerences required. All the tests were made using Resione T74, but some tenacious resins or mixes should work aswell. To use this resin on my Elegoo Mars 4 Ultra, i had to warm up the resin. It worked well, but because of the winter's cold i finally installed a heater. Simply beware, brittle resins will break. This also happened with the T74 when i tried to separate the pieces on the first prints (i forgot to warm it up before doing so), and this is why i included some alternative pieces aswell. I consider testing with a mix T74/F69. The new joints feature slots that help with deformation, and are pretty efficient at mitigating the stresses, so using T74 alone or similar should be fine. The new joints are not usefull for the smaller scales, such as the 1/35th scale i tested (the original elements work better), but quite usefull at 1/24 and more, such as the 1/15th scale. I hope you'll find this model satisfying! Best regards! Alex ____Update: I added as a bonus for those who still remember the old versions i…