UMX Viper FPV Camera Mount + VTX Cover

Описание

UMX Viper FPV Camera Mount + VTX CoverSummaryThis is a lightweight FPV camera mount and VTX cover setup designed for the E-flite UMX Viper 30. It is intended for clean FPV installations where you want a simple printed camera mount and a small cover for the VTX area.This setup is especially useful for canopy-free or modified-canopy FPV builds where the goal is to get a clearer view from the micro EDF without adding much weight.Included files:UMX_Viper_Camera_Mount.stlUMX_Viper_VTX_Cover.stlUMX_Viper_FPV_Mount_Project.3mfApproximate Part SizesCamera mount: 10.0 mm × 31.5 mm × 21.6 mmVTX cover: 18.0 mm × 15.0 mm × 3.1 mmPrint SettingsSuggested starting settings:Material: PLA, PLA+, PETG, or lightweight PLALayer height: 0.12–0.20 mmWalls/perimeters: 2–3Infill: 15–30%Supports: Use only if your slicer shows unsupported overhangsBrim: Optional, helpful for small partsOrientation: Use the included 3MF as a starting pointFor aircraft use, keep the print as light as possible while still having enough strength to hold the camera/VTX securely.Installation NotesTest-fit before gluing or taping anything permanently.Use lightweight double-sided tape, foam tape, hot glue, or small dabs of adhesive depending on your setup.Make sure the camera angle is correct before final mounting.Keep wiring clear of the EDF intake, fan, linkages, and control surfaces.Check center of gravity after installing FPV gear.Range-check and perform a short test flight before pushing the setup hard.TagsUMX Viper…