Dunkholder / Bin-Lock

Dunkholder / Bin-Lock

Бесплатно STL Гаджеты
  • 15 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

Trash Can Holder Prevents the trash can from tipping over in wind. Easy to install. 2 wood screws are all that's needed. Recommended Print Settings: Material: PETG or ASA Layer height: 0.20 mm. optionally 0.24 for faster print Infill: Honeycomb or Gyroid 25–40% Walls: 3–5 Should be printed on its side for best strength Parts: 1 - The "holder" itself 2 - The lock 3 - Locking pin/hinge (can optionally use an M6x60 bolt with nut instead)

About this model

Dunkholder / Bin-Lock is a бесплатно 3D model in the Гаджеты category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели