UV chamber with a timer.

UV chamber with a timer.

Бесплатно STL Прочее
  • 22 просмотров

Эта модель размещена на Thingiverse. Файлы, изображения и лицензия принадлежат автору.

Открыть на Thingiverse ↗

Описание

I decided to build a UV chamber with a timer. I used a timer switch and a motor from a microwave oven. I also used several platters from old HDDs. The power supply and UV LEDs were purchased. The aluminum profile is 20×10×220 mm. The wires were also taken from the same microwave oven.Check video https://youtu.be/29xRJDaHOpc

About this model

UV chamber with a timer. is a бесплатно 3D model in the Прочее category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.

Похожие модели