Vintage Speedometer Inspired Clock

Описание

I wanted to make a clock inspired by the vintage car that was in my family for two generations. I customized a font to make the numbers, and programmed it on a Pi PicoW. Unfortunately it still has a lot of work before it's complet, but here it is.Here's a short video to see it in action: https://www.youtube.com/watch?v=3jF1MOfdnewWhat it has:Runs on Micropython, just un-zip then upload the files using Thonny, and as long as your connections are correct it'll start showing time when the GPS gets a sync.Uses a GPS module to get and synchronize the time (programmed to EST, can be changed in the code)Once the needle gets to 60 minutes, it rewinds to 0.The Lower OLED displays the Hours (in the trip odometer position)The Upper OLED displays the year/month/day (in the total odometer position)The needle zeros by slipping on the drive shaft when it reaches the little pin stuck in at zero.The Pico and the Motor driver do not share the same power supply, but they both are running on 5v from USB supply.What it hasn't, but hopefully will someday:Auto adjust to daylight savings.Twelve LEDs for lighting around the rim, one placed a each 5 minutes and controlled by a shift register to do fancy things.A custom PCB which I've started to design (and included).Buttons or dials to change modes and settings, ie: Speedometer mode, adjust timezone, etc.A lens in a chrome bezel.Please use the FreeCAD file for reference and making any modifications that you require. Here are a few notes:Parts are…