ESPixelStick V3 Case

ESPixelStick V3 Case

Бесплатно STL Органайзеры и хранение
  • 23 просмотров

Эта модель размещена на Thingiverse. Файлы, изображения и лицензия принадлежат автору.

Открыть на Thingiverse ↗

Описание

This is a case designed to hold an ESPixelstick V3 Printing:0.4mm Nozzle, 40% infillAdditional parts:4x Heat Set inserts (M3 Brass Insert 100pcs, 5 mm OD, 5.7 mm Length, Female M3)2x PG7 Glands4x M3x7 Socket Head Bolts1x Silicone1x Conformal coat spray5x Ferrule ( Optional )1x Outdoor 16 Gauge wire in round sleeve1x Ray Wu, X-Connect, ETC cable1x SD Card ( For EsPixelStick )100000000x Christmas lights :)Post processing:1)Clean up any stringing2) sand down holes for Glands.3) Install heat set inserts4) Install Glands5) Put connectors on glands6) Connect cabling to EsPixelStick7) Test pixel stick7) Screw lid closed8) Coat container with Conformal coating / ???9) Enjoy

About this model

ESPixelStick V3 Case is a бесплатно 3D model in the Органайзеры и хранение category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.

Похожие модели