MyRCCar 1/10 Model-S RC Car Body revisited. Smoothed and detailed by Dlb Five

Описание

This is one of my first RC car shells, and the first for an On-Road car. The design is from 2018 and I used a lowpoly free model as a source, but it was made with some "tricks" to short designing time. In fact, the photos and the video are of the "old model", which has not changed sustancially. Now I have learnt some new tools and process which allow me to share again this design but smoothed and without need of "tricks" to print it correctly. This 1/10 RC car body is 200mm wide and has a 295mm wheelbase. It will be hard for you to find a chassis with this long wheelbase, so you can think about printing the chassis tooo :) March 13, 2021 Update: The central big part has been divided into two new parts and now the whole body can be printed in a smaller than 200mm Z build volume CHOOSE A CHASSIS Now I have two options for you. You can use the OLD MyRCCar OBTS On-Road Chassis, specially the version created for this body, but now you can also use the NEW MyRCCar KIDS On-Road Chassis to put under this design. MyRCCar KIDS will allow you to use other RC car bodies in the future, without having to re-print parts for the chassis. Its Universal Holding System should allow you to mount this body or any other, commercial or not, adapting the wheelbase of the chassis from 250mm to 300mm in steps of 5mm. Anyway, for both OBTS and KIDS chassis, you will find some Body side holders for the 295mm wheelbase of each chassis, which will allow you to mount the body without using the Universal…