Raspberry Pi4 case for Prusa MK3 - Remix by Nathan Ringham

Описание

A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no supports needed. I liked the original case that this remix is based off of but, I didn't like that in the original you had to widen the holes on the Pi4 for M3 screws that would go straight through the board and into the bottom part below. I found a nice cooling plate that offered attachment points for securing it to the board and the board to other things. I thought this was a better solution for attaching the case to the board over the original design. For this project you will need:https://smile.amazon.com/gp/product/B07Z3Q417K/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 along with 4 M2.5x5 Screws (not included with the kit)4 M2.5x8 Screws (not included with the kit)(I designed the screw holes around these but any M2.5 screws of the mentioned length should work)https://smile.amazon.com/gp/product/B07HC3LQYS/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 2 M3x10 Screws (for mounting the case to the printer) 1 6 inch USB A to USB B Male cable (you can use longer but, there will be more cable overhang) | Download free and paid 3D printable STL files