LARGE REAR MUDGUARD - MIATA NB (MX-5)

Описание

Rear Mudflap / Mudguard for Your NB Miata This is a 3D model of a rear mudflap or mudguard for your NB Miata. It is sliced into three pieces (five pieces for 220x220 printers). Files are for the right side. For left side just mirror every model in slicer before printing. To install it, you might need to drill holes on the print. You can use a little grease on the original rivets and place the print over them to mark the spots for drilling. The model has a thickness of 2.5 mm. I found that the original plastic rivets were not suitable for mounting it, so I used u-type clips and screws instead. UPDATE: V2 - I added mounting holes on the bottom, and it has more extruded desing at the edges