IT Led Light box & Litho

Описание

We all float down here !! One for the horror fans. An awesome Penny wise Led light box with 2 x litho windows. Printed on a Bambu multicolour printer. 3MF files are included for the coloured parts used to print the unit. I would reccomend using your own settings as each printer is different. Printed face down on a textued plate. There are different variations to the model. See listed below, Each part or varition which are coloured have a number at the start in brackets [1] [2] etc. Load the one's with the same number into the slicer at the same time and when prompted load the model as 1, click yes. [1] - IT Face - This is for the wires to come out the back [2] - Balloon with litho holes [3] - IT Face - This has a side hole for wires to come out the side, recommended if it is wall mounted [4] Balloon - This is a plain balloon with no holes and doesn't require the lithos. Alternatives backs also inlcuded with different slot dependeing on how you like to have your lights. wall mounted version has 12 mm holes in the back at 70 mm centres. Balloon to be glued onto face body this is a thin profile. Apply super glue to the internal side of the face and slide into place and hold until bonded. I prefer to use the 10 x 1,7 mm slot. Feed the leds all the way thru the back and then lay the back down and peel off the adhesive tape and press around the perimeter of the housing. Glue litho windows into place. Test lights and when happy apply a little dab of glue onto the lip of the back…