Steadicam Stabilizer for GoPro

Steadicam Stabilizer for GoPro

Бесплатно STL Прочее
  • 12 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

3D print all the parts from the folder Connect the joints in the order 1,2,medium,3,4,5,6 Screw the GoPro mount to the joint 1. Insert the arm mount into the x-axis and loosely tighten with the nut Insert the lever into the lever groove fasteners so that the holes in them are aligned and screw the lever pin into them Position the Y axis, nuts and X axis as shown in the picture 7.Screw the Y axis into all the parts in the picture Fill the counterweight with water, small stones or air gun bullets. Done. The steadicam is ready for use.

About this model

Steadicam Stabilizer for GoPro is a бесплатно 3D model in the Прочее category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели