Xbox 360 Camera Modular Mount by Code and Make

Описание

An Xbox 360 camera mount that is compatible with HeyVye's Modular Mounting System. There are two versions: codeandmake.com_Xbox_360_Camera_Modular_Mount_v1.1.stl - Has a connector that is the same length as the connectors in yyh1002's Modular Mounting System. That means this version can be used with the nuts available in the Modular Mounting System. codeandmake.com_Xbox_360_Camera_Modular_Mount_-_Connector_Extruded_5mm_v1.1.stl - Has a connector that has been extruded by 5mm to allow an M5 wing nut to be fitted. This is the version shown in the pictures. The wing nuts shown measure 21.5mm at the widest point. If you are using this version, you may also be interested in my remix of Flat_stand.stl from yyh1002's Modular Mounting System, which is also compatible with M5 wing nuts. Please see my make for additional pictures. This design is completely free and shared under a permissive license. Your support is hugely appreciated. Did you know? Some of our designs cannot be found on MyMiniFactory. If you are looking for more, check out our premium projects: https://codeandmake.com/premium Versions 1.1 (9 Dec 2020) - Rotated into printing orientation 1.0 (26 Jan 2018) - Initial version Printing We suggest printing this upside-down with base-only supports, as shown in the pictures. Resolution: 0.1mm - 0.2mm Infill: 10 - 25% Supports: Doesn't Matter Rafts: Doesn't Matter License "Xbox 360 Camera Modular Mount" is licensed under the CC BY license by Code and Make. We are proud to…