FX Impact Magazine .30 Cal

Описание

Magazine in .30 with 21 Rounds capacity Other than the 4 STL items you will need: Piano wire 22 gauge to make the rotary spring, I use a m12 coach bolt in a screwdriver and starting from the end running in reverse working the wire towards the screwdriver in the threads you will need 12-13 coils untensioned for 1 magazine. https://www.youtube.com/watch?v=O9978ljeCGc 2X3mm ball bearings 2X springs 2.4mm OD Compression Springs - 0.4mm Carbon steel 6mm length M4 nyloc nut and m4 bolt 12mm Flange Socket Button Head (stainless) grind the head down until it sits flush and doesnt hit the valve block Printing : 1 The main body should be printed with the base on the bed with support (touching the base) for the breech rebate, you will get support in the central nut hole - just pry it out afterwards 2 The rotor should print upside down 3 The catch should be printed upright with support and 4 The Lid should be printed upside down (no support) I use clear pla which works, but black will work too! Finishing 1 carefully clean up the breech area - I smooth mine off with small warding files 2 Rotor just needs the support removing. 3 the catch just the support removing and tidying up 4 the lid just needs wiping around to make sure there is no remaining filament