Standard size mini breadboard

Описание

Here is a standard size mini breadboard that is very easy to print and very functional. The hole spacing is conventional (0.1"/2.54mm) and can therefore accommodate all electronic components just like a store-bought breadboard. However, be careful with your projects: the components must not heat up too much, especially if you use PLA for printing otherwise the breadboard could melt! To finish the assembly it will take a bit of patience, since you will have to fill all the slits under the box with aluminum foil, filling each line well but also taking care not to fill the space too much (you must allow each foot to be able to penetrate the aluminium). It is probable that after some use the aluminum layers will have to be replaced to make the breadboard efficient again. For safety and better use, then cut out a cardboard base of the same size as the breadboard (or print the base.stl file) and join it with double-sided tape. Don't hesitate to subscribe to my patreon ,find it there too... https://www.patreon.com/claudiogirolami (https://www.patreon.com/claudiogirolami) Good fun !