GYMNASTIC RINGS - BP3D

Описание

Gymnastic rings that are split in half for better and stronger print, with an outer diameter of 218mm and a thickness of 28mm. There are also 4 alignment blocks that are inserted in one half of a ring and then everything is glued together, just apply some pressure for some time when glueing them.You can print it in PLA or PETG, both are strong and print great.0.2 layer height or 0.24 with adaptive layers, 0.4 or 0.5 wall thickness, with at least 5 walls (more walls=stronger ring), 20-25% grid infill, 4 or 5 top and bottom layers.