Bird house, nesting box, bird house nesting box
- 19 görüntülenme
Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.
Cults3D üzerinde görüntüle ↗Açıklama
Bird house, nesting box with suspension hole. Due to ring construction double-walled construction. Thus also waterproof, Also suitable for the installation of electronic or optical devices for property monitoring, or expulsion of birds from the cherry tree. The inner wall can be drilled. Or short screws can be screwed in. Even the bottom of the bottom ring can be worked on, because even. the following bottom plate is completely closed. The suspension box is screwed together by SPAX screws starting from the roof and working towards the floor. 6 pieces of SPAX are required per ring. If you use the nesting box as a bird house only, please make sure that no screw tip protrudes into the door hole. You don't want the animals to get hurt by it. The perch is glued in place.
Bu model hakkında
Bird house, nesting box, bird house nesting box, Cults3D topluluğunda paylaşılan ücretsiz bir Hayvanlar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.
Dosya formatları
- STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.
Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.