Crawler V303 4x4 (Volvo C303 Replica) - 1/10 RC Body by Ian Jim

Açıklama

PLEASE make sure your 3D printer is able to print a minimum size of 220x250x158mm. before purchasing. Aftermarket shock towers may be required. All inner fenders need to be removed before installing. UPDATE: 1. Added V306 interior floor plan. This version of the interior floor plan was designed for the V306, but can directly fit in V303 and V304. Some additional glueing / mounting may be required for use with V303 and V304. 2. Floor plan was designed with the Vanquish VS4-10 chassis in mind, the floor will clear the stock VS4-10 shock towers, but may not clear on the SCX10 ii, SCX10 iii, TRX4/TRX6 chassis. Therefore some cutting may be required. The Crawler V303 is pure utilitarian. Whether it is for hauling cargo or passengers, this van will go practically anywhere. It’s designed specifically to fit on SCX10 ii, SCX10 iii, VS4-10 Pro, and TRX4 chassis with a standard short wheelbase of 290mm, outer tyre to tyre width of 230mm and maximum tyre height of 110mm. Feel free to check out our custom build here. The short wheelbase makes it a very nimble and capable crawler with lots of all around ground clearance, especially when accurately paired with portal axles. Size comparisons of the V303 4x4 and Bog 406 are shown in the photos above, please note that that Bog 406 is sold separately. Similar to our other body shells mounting the body to the chassis is made easy with the included body mounts, which are designed beefy, trail worthy, and with fore and aft adjustments. We’ve…