Modified MPSM E3D Mount W/Blower

Modified MPSM E3D Mount W/Blower

Ücretsiz STL Gadget ve Aksesuar
  • 17 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

I had to remix tekhertz's model because the blower scoop was lower than the nozzle of my clone E3D V6. I simply cut 3mm out of the middle to move it up and then moved the mounting hole for the blower fan up 3mm. I also ended up beefing up the top portion as my m3 nuts would spin and get stuck inside due to the very thin walls. With this version that does not happen. Use the "Fan Duct" file from the original design. Fusion360 files are attached if you wish to remix this more.

Bu model hakkında

Modified MPSM E3D Mount W/Blower, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller