PSG-1 KIT to G3

Açıklama

This kit was developed by 3D ARMY, allows you to completely transform a airsoft G3 from JingGong into the mythical German sniper model PSG-1. When you buy this kit you have full access to all files to print in yout 3D printer in a convenient and optimized way. Includes all STL files and the detailed assembly guide, with several images and assembly notes. It ´s a simple body kit to print and mount on the G3, doesn´t require anny knowledge in the assembly or customization of airsoft guns. It´s a kit for beginner level! The kit is divided into several components: 1) Barrel 2) Handguard 3) Grip 4) Stock 5) Magazine 6) PSG-1 Sidebar 1) Barrel The barrel is attached to the gun with the same system as the JingGong G3 fitting including the threaded bolt that holds the metal sights. List of components: 3D Printed Parts 1x Aluminium Tube : 19mm Ø x 240mm 1x Bolt : M5x20mm 1x M5 Nut 1x M3 Threaded Stud 2) Handguard The handguard it´s divided into four parts, two on the right and two on the left. It´s necessary on both sides to glue the two front and rear parts according to the assembly manual. Each side is reinforced with two threaded rods for a solid part. List of components: 3D Printed Parts 1x Bolt : M4 x 30mm Conic Head 1x M4 Nut 3x Bolt : M3 x 15mm Cylindrical Head 3x Bolt : M3 x 25mm Cylindrical Head 5x M3 Nut 4x M4x180mm Threaded Rod 3) Grip Very ergonomic PSG-1 handle, developed for gearbox V2, the assembly method it´s the same as the original handle of the G3. As in the photos…