Large Interlocking Block Hinge Adapter

Large Interlocking Block Hinge Adapter

Ücretsiz STL Diğer
  • 13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

(Debuted at #mrrf2018) This Large Interlocking Block hinge has a +/- 45 degree pivot angle. When this is printed it does take some force to break the hinge loose. This was designed to be able to relatively hold the angle it is set, hence why it takes some force to break the hinge loose. This is compatible with major brands interlocking building blocks. There are two styles, the one noted with "m5" in the filename has a base designed to have an optional M5 x 6.7mm McMaster Heat set brass insert if you would like to mount this to anything. Best printed bottom side down.

Bu model hakkında

Large Interlocking Block Hinge Adapter, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller