Roulette de queue aéromodélisme / RC airplane tailwheel

Açıklama

Tailwheel designed for a 2.5mm steel round, piano wire or other train leg. By changing the scale in your slicer you can adapt it to any type of device! PETG to be preferred on models over 1KG. The parts have been designed so that the leg turns freely in the support and is locked in the return (2.45mm hole) by tapping gently with a mallet, locking as hard as possible by adding epoxy glue before locking and also by grinding the piano wire head. file of the spacer replacing the stop ring provided. RC airplane tailwheel support perfect for steel round bar of 2,5mm. PETG considered as better for models of more than 1KG. The parts are designed in order to turn freely in the support and to be fixed in the command (2,45mm hole) with a hammer ( gently :-) ). If you want a stronger assembly you can add epoxy glue before this step in the hole, you can also grind the steel bar from above to secure the junction ( mechanical grinding will melt the PETG in the top of the hole and secure the junction).