cigarette rolling machine

Açıklama

3d model ready to print of cigarette rolling machine,roll cone cigarettes ,with 4 different size. 5 mm to 9mm can be adjust on both side, Need a 2 mm diameter iron rod (can be cut from an old barbecue mesh), a pen spring, 6 small screws, and a 0.1-0.2 thickness polyester fabric. 160 mm long and 68 mm wide (edges can be heated with a lighter after cutting if the fabric is broken apart,To assemble the fabric you need to arrange the fabric according to the drawing, then press the fabric holder in the front and then close the lid, aim the adjust handle towards the back of the rolling machine, and press the back cloth holder, this is the smallest size of the cigarette plus minus 5 mm Depending on how tight the fabric is, there are 4 different dimensions on each side so you can roll a cone cigarette.To resize, pull the adjust handle and rotate ,Feel free to contact me with any questions you may also email ilankaplan@walla.com - more design -https://cults3d.com/en/users/ilankaplan84/creations