Educational 3D printing parameters Kit

Açıklama

With this kit you will be able to explain some of BCN3D Cura parameters to other users 3D printing. It has been printed with a Sigma R19, and you will need to change some things to print the parts. In this case the “Per model settings” BCN3D Cura is really helpful. For example all Infill parts can be printed at the same time, and you will have to assign each part the respective infill percentage. The Layer Height parts have to be printed following this conditions: Layer Height 01mm · Change the Layer Height to 0.1mm Layer Height 02mm · Change the Layer Height to 0.2mm Layer Height 03mm · Change the Layer Height to 0.3mm The Infill parts have to be printed with these parameters: Top Layers: 0 Walls: 2 infill0 · Change the Infill to 0% infill20 · Change the Infill to 20% infill50 · Change the Infill to 50% infill80 · Change the Infill to 80% infill100 · Change the Infill to 100% The Shell Parts have to be printed with these parameters: Top Layers: 0 Infill: 0% 1 shell · Walls: 2 2 shell · Walls: 2 3 shell · Walls: 2 4 shell · Walls: 2 5 shell · Walls: 2 Check out our new R19 printers on Youtube: https://www.youtube.com/watch?v=q7UxQWz5Nm8 Don’t forget to download BCN3D Cura to ease the Dual Extrusion printing workflow: https://www.bcn3dtechnologies.com/en/3d-printer/bcn3d-cura/ Follow us through our social media channels in order to get more information about BCN3D: BCN3D Facebook: https://www.facebook.com/bcn3dtechnologies/ BCN3D Twitter: https://twitter.com/bcn3dtech BCN3D…