Monoco's Monocaro Bell Staff

Açıklama

Dangerous Ladies' 3D models for Monoco's Monocaro Staff. Model by Jennifer Rezny (@quicksparrows) .stl format. Cut for printers 250mm tall, and finishes at roughly 70" tall. It doesn't include rope. You don't want to 3D print rope. That'd be silly. The bell is designed for a rigid knocker to hang straight down, as is canon, but if you want to install a couple screw eyes and cord or chain so it can swing, knock yourself out! Uses the following hardware: 1" dowel cut 9.5" long, for knocker inside bell 1/4" rod, cut 7.5" long, for top of staff 1/4" rod, cut 19" long, for top of staff 1/4" rod, cut 44" long, for middle to bottom of staff 1/4" rod, cut 30" long, for middle to bottom of staff If you need leads on rope: 25mm (or 1") is good. Some good keywords are "sisal" "jute" and "manila". In a pinch you can use cotton, but it tends to be really soft and squishy. It's usually about $1.50-$2 per foot. Files include: - Photos - .STL files Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced. Feel free to tag us to show us what you print and make! We love to see finished works.