RC AVATAR SCORPION - PHONGPHAM

Açıklama

Designed to be easy printed without support. Fun for flight!Parts:Motor (2 pcs): https://sea.banggood.com/custlink/mG3VC4RJOSSome Alternative links for motor here (choose around 2400-2500KV version):https://sea.banggood.com/custlink/D3KFpgdpLbhttps://sea.banggood.com/custlink/3vvVrBRclkESC (2 pcs): https://bit.ly/32wq6BNFlight Controller (1 pcs): Original I use F4 Omnibus, but this one sold out on page I buy before. Please choose same function FC.Servo (2 pcs): https://bit.ly/3ePMGdBLinks Servo (1.3mm - 4 pcs): https://bit.ly/2Ic31gZRx XM+ (1 pcs): https://bit.ly/3eN66zJTx Qx7 (1 pcs): https://bit.ly/36pv7gACarbon Tube (Please note to choose 8mm OD tube): https://bit.ly/38uk9t8(Need 2x10cm and 2x14cm of 8mm OD Carbon Tube)Bearing (4 pcs): https://bit.ly/3pga3SzM2 Screws (25 pcs 10mm): https://bit.ly/2IcyXBWM2 Nuts (4 pcs): https://bit.ly/2U9iT5ZM3 Screws (2 pcs 16mm and 4 pcs 12mm): https://bit.ly/36lNbbtM3 Nuts Nylon: https://bit.ly/32w3HVbPropeller: https://bit.ly/2IlmnAehttps://bit.ly/3eKRGQLBattery: https://bit.ly/2IeNsoOVideo assembly: https://youtu.be/zcQg75srE_oVideo setup: https://youtu.be/UfoelNpbh3o(I hope you can contribute better PID. Thank you!Video flight test: https://youtu.be/HM12fAfXBKo3D PRINTING SETTINGSSoftware setting: Ultimaker Cura 4.1.0Printer: Anycubic Kossel PlusMaterial: PLA 1.75mmLargest Object size: 128.6 x 138.7 x 178mm and 159.3 x 137.9 x 32.5mmLayer Height: 0.2mmWall/Top/Bottom Thickness: 0.8mmInfill: 30%Printing Temp: 190 CPlate Temp: 40…