SAM (TRICK R TREAT) Lightbox V2 by MANIACMANCAVE3D

SAM (TRICK R TREAT) Lightbox V2 by MANIACMANCAVE3D

Ücretsiz STL Düzenleyici ve Saklama
  • 15 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Join my patreon, get 20% off of every file available here on Cults3D and become a seller of 3D prints using my files! 🌟 https://www.patreon.com/ManiacMancave3D Easy to print lightboxes for every printer type. Two part lightboxes with a body and a logo cover. The cover is layered for each color to print seperately! No AMS needed. The box itsself is 25mm in depth, so it can stand properly. The logo cover fits into the box and rests on the additional inner lip. You may add some glue at this point. Two boxes for this one, one with a tunnel at the top to connect the head and lollipop for easier light installation. Follow me on Instagram: @maniacmancave3d @maniacmancave This is fan art. All rights to respective owners. Feedback is always welcome!

Bu model hakkında

SAM (TRICK R TREAT) Lightbox V2 by MANIACMANCAVE3D, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller