Pinned Hinge

Pinned Hinge

Ücretsiz STL Diğer
  • 13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Plenty of RC hinges on here but most were not symmetrical so I though I would print one modeled after a popular brand. This is best printed standing on it's edge, and with supports. Takes a piece of 0.7-0.8mm piece of piano wire as the hinge pin (or a cut off T pin). Worked well. Only post processing was to clean the holes with a 1mm drill. It is symmetric so just print two and assemble.

Bu model hakkında

Pinned Hinge, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller