KiLLA Escape from Tarkov
- 14 görüntülenme
Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.
Cults3D üzerinde görüntüle ↗Açıklama
Hi guys, I present you my Killa Diorama project, which I have been tinkering with for quite a long time, as I have always added or changed something new, most of all it has affected the electronics. But now it's finished and I'm sharing it with you )) https://youtube.com/shorts/j3fNzoUg-5Y?feature=share To make it very short, the basis of the electronics is a battery-powered Mp3 sound module, plus 25 rectangular blue 5v LEDs 2x5mm, 25 100 Ohm resistors, 2 LED floodlights warm white (matching resistors are already included with the purchase), I replaced the 0.5Watt speaker from the sound module with a speaker driver from a JBL Go 2, the sound has become much better and the small circuit board actually has enough power for it. There are also 2 mini push button switches 12mm to turn music on/off and to change songs, there is also a small switch on the back of the box to turn off the power completely. You will also need thin cables, screws, hot glue and superglue. List of components: 1) Sound module: https://www.amazon.de/dp/B0B3W6SWPY?ref=ppxyo2ovdtbfedasintitle 2) Push buttons : https://www.amazon.de/dp/B07WGZ9BGG?ref=ppxyo2ovdtbfedasintitle 3) Floodlight…
Bu model hakkında
KiLLA Escape from Tarkov, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.
Dosya formatları
- STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.
Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.