Modular SUP Fin System - FunctionalModels

Açıklama

What is it?A modular fin system for slide-lock style SUP fins. Will it work with my SUP?This was designed for my particular model year of Body Glove Performer 11. If the slot on your paddleboard is wide than ~20mm it will likely fit - but you can just print the Slide Lock and test it alone if you're unsure. If you want this adapted to a particular fin mount type, feel free to comment below. I'd be happy give other mounting styles a shot if there is enough interest. How is it assembled? The PartsFin: The fin itself. There are 3 types included, more on this below. Slide Lock: The base of the fin that slides into the paddleboard. Clip: The clip that holds the fin, the slide lock, and the paddleboard together. [Not printable]: Twine or rope for securing Clip to Fin [Optional]: M2.5 x 20mm bolts can be screwed through the Slide Lock and into the Fin for added strength Assembly1. Remove all support structures, including the supports under the clip.2. Align the 3 cleats on the fin with the 3 holes in the the Slide Lock. Press the fin down into the Slide lock firmly.3. Slide the fin backwards. This should be slightly difficult, its intended to be a tight fit.4. Try pushing the clip through the hole. If it goes straight through without locking, you might not have seated the fin correctly in step 5. Remove the clip after testing. 6. Use a piece of twine or rope to connect the clip to the two holes in the side of the fin.7. Slide the fin into the paddleboard and lock it in…