Quick Change Dildo Base Mid

Açıklama

I designed this quick change Dildo Base to accompany my strap-on and using as many parts to fitting dildos interchangeable . The "Strap-on Lock" is inserted into the "Dildo Floor Base Mid" with 3 small pieces of 6mm silicone tube placed in the recesses to act as springs this may need a bit of experimenting to get the lock to move properly. The "Strap-on lock" is held in place with the "Strap-on Socket" using 3 x 3mm countersunk self tapping screws with 15mm of thread. Ensure the "Strap-on Socket" camera mount is facing to the side' The "Strap-on Action Cam Mount" can be fitted with 2 small 3mm screws if if required. The "Twist Lock VacUloc Dildo Mount" requires a M6 x 75mm screw and M6 dome nut to give it strength to stop any breakages inside an expensive dildo. The "Twist Lock VacUloc Dildo Mount" is inserted into any VacUlock style dildo and then can be inserted into the strap-on assembly and twisted until the lock clicks into grooves in the base of the "Twist Lock VacUloc Dildo Mount" . The Dildo Floor Base Mid has a recess to accommodate adding weight to keep it stable and avoiding falling over, I found lead shot type weights for putting in diving belts mixed with epoxy resin poured in the hole to work very well.