Bruk Bottle

Bruk Bottle

Ücretsiz STL Diğer
  • 16 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Manual modifications of the gcode are required to make Bruk watertight, so I suggest printing Bruk.gcode instead of slicing the .stl Upload Bruk.gcode on an SD card and insert it in the printer. Ignore warnings and launch the .gcode from the printer interface. Bruk.gcode is compatible with printers with 0.6mm nozzle and at least 130x130x210mm build volume. Lower speed down to 50% after the print starts on bowden printers. Bruk.gcode prints in 6h with 30g of Polypropylene (PP) filament. Apply standard plastic adhesive tape (commonly made of PP) to the bed to ensure adhesion. Tested with Formfutura PP Website: https://www.riverfamily.art/ Video: https://www.youtube.com/watch?v=SnC3xIh6hp4 Contact: alessio@riverfamily.art LICENSE: Public Domain https://creativecommons.org/share-your-work/public-domain/cc0/ Also applies to gcodes, slicing process, pictures, videos and names

Bu model hakkında

Bruk Bottle, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller