Bucket Dryer

Ücretsiz STL Diğer

13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

I needed a filament dryer and did not feel like ordering one. I had this deck top heater laying around waiting for me to build an encloser for the printer. I decided to use it for this for now. Use and standard 5-gallon bucket and lid. The heat shield on the bottom is 2 pie pans and a pin holder, both for the dollar tree. My first build did not have this, and it did not melt the bucket. And would easily run up to 70c. If you do not use this. You will have to raise the filament rolls some other way. If you do use this. Cut the heater mount hole 37mm up from the bottom of the bucket. This should put the heat between the pans. Print any layer height as you want. I used 3 walls and 15% infill Heater: https://www.amazon.com/gp/product/B07573FKSG/ref=oxscacttitle1?smid=AT571DW3Z6W0I&th=1 Temp gauge: https://www.amazon.com/gp/product/B07TBDJV31/ref=oxscsavedtitle4?smid=A2PQGFJXAT8J9K&psc=1

Bu model hakkında

Bucket Dryer, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.