Box Corner
- 25 görüntülenme
Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.
Cults3D üzerinde görüntüle ↗Açıklama
When using my laptop outside, I needed something to shade the screen to eliminate the glare. Using a cardboard box, I taped the sides and put my laptop into it. It worked great but the tape did not hold that well. That's when I came up with this idea. You can use them as is, if they slip a little, you can take a pencil and poke through the hold, this will make the cardboard interfere with the box corner enough so it doesn't slip that readily. A more permanent fix is to put a short bolt through the hole to bind the box corner to the box itself. 06/07/2026 - Slight mod to small box corner, created large box corner. Small is 45mm (1 3/4") and large is 65mm (2.5")
Bu model hakkında
Box Corner, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.
Dosya formatları
- STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.
Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.