Skadis Dowl holder

Skadis Dowl holder

Ücretsiz STL Gadget ve Aksesuar
  • 20 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Hang a 1/2 inch (12.7mm) dowel from your IKEA Skadis peg board. Print one open end and one closed end for each set. Cut your dowel to fit in between the space you are planning to make. The dowel inserts into the closed end and then drops into the open end so it is easy to lift out to add items to the dowel. There is a long and a short version of the holders included in the files. Dimensions are in the pictures (in mm). These files are for private use only and DO NOT authorize you to share or produce for commercial sales.

Bu model hakkında

Skadis Dowl holder, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller