Shapes Bead Roller - Egg

Açıklama

Our rollers are ideal for working with polymer clay, although they can also be used for other soft materials such as plasticine, sugar paste, cold porcelain, among others. It has a rigid and ergonomic design guaranteeing an excellent and prolonged use. The curved sides provide a firm grip. It also includes a volume on one side to measure the amount of clay needed. Push the clay into the rectangle until it is completely filled, then cut off the excess flush with the body. The rails are shaped differently to avoid placing it in the wrong position. Use PLA plastic to print this bead roller. PLA is a hard plastic and will not bend. Do not bake your beads on the bead roller. The print is for personal use only. Do not distribute the STL file and do not reproduce the print for resale purposes. You may sell beads and finished parts. CLAY PIECE MEASUREMENTS📏 This roller has a single size of 20mm. ✼In case you want to obtain a clay piece of another size, it is recommended to use the formula below to obtain the percentage to which you should scale the pieces. If you scale a roller to a smaller size it is recommended to compensate the tolerance with a negative horizontal expansion (between 0.05mm and 0.1mm) Percentage= (Desired dimension) * 5 ✼ TIPS Keep the polymer clay at room temperature and avoid rolling for too long, as the clay may overheat and break. Keep the roller clean and free of debris from other pieces. If necessary, apply a light coat of grease or mineral oil (cooking oil…