Humidity/tempsensor box AHT2X

Açıklama

I've created a compact enclosure for the small humidity and temperature sensor board featuring an AHT2x sensor. To assemble it, you'll require the sensor board itself, as well as the following components: 1 M2.5x10 button head hex screw 2 M2.5x8 flat head hex screws 1 rubber grommet (O-ring) with a 3mm inner diameter and 1.9mm thickness A 4-conductor cable with a 3.5mm outer diameter Begin by soldering the sensor board. Next, secure the cable with a clamp, ensuring that the sensor board hole aligns with the hole in the case. Then, position the grommet on the board before attaching the top shell. Pay close attention to the 'studs' in the corners; they should fit snugly within the lower part's corners.