Whirlpool dishwasher pump bearing

Whirlpool dishwasher pump bearing

Ücretsiz STL Moda ve Takı
  • 20 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

If you are a DIY person, and if you have a whirlpool dishwasher (mine was model WDF750SAYM3) and have run into a problem after a few years, where the dishwasher does not seem to clean properly any more, you may have a problem with the pump motor having worn out the original cheap graphite bearings (2) in the motor. When they are worn the pumping function is reduced. Check online for the actual problem to see that replacing the bearings could be a possible solution. Rather that spend a couple hundred dollars for a new pump housing, I used my resin printer to create new bearings. Solved my problem. Will see how long they will last. If I need another set, I will try and add some graphite to the resin. See also https://www.thingiverse.com/thing:3960628

Bu model hakkında

Whirlpool dishwasher pump bearing, Cults3D topluluğunda paylaşılan ücretsiz bir Moda ve Takı 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller