BOX / STORAGE CASE - Dynatech 3D

Açıklama

A small box to store your stuff !I use it as storage for 3D printing tools.Body included :-->Right side of the box ( size : 175 mm x 50 mm)-->Left side of the box (size : 175 mm x 50 mm)-->Valve (size : 182 mm x 64.5 mm)Instructions:-> Print both sides of the box-> Print the flap of the box-> Fold the lid until it fits into the groove on one side. Don't be shyDon't be shy, the hinge is solid!-> Put glue in the holes provided for the nesting.-> Close the box with the other side-> Wait for the glue to dry-> Enjoy it!3D PRINTING SETTINGSMinimum bed size required: 182 mm x 65 mmAmount of material required: approx. 150 gMaterial: PLAPrint direction: check images.Media: noneNozzle size: 0.4 mmLine width: 0.4 mmLayer height: 0.2 mmOuter walls: 2Filling: 15Slow speed for the flap: first layer: approx. 20 mm/s then approx. 150 mm/s max, with a good bed setting.If you encounter any problems, please feel free to contact me on Instagram.